Header Graphic
Apps for iPad

FAA Glossaries

Touring Machine Company

Chocks

While cleaning out the garage I found a five foot piece of angled steel that was purchased for some long-forgotten project. Rather than recycling it, I made chocks. I picked up some stretchy cord for 99¢ and cut the steel with my sawzall. A quick cleanup with a file and a couple of knots and voila, three sets of lightweight chocks.

home made chocks

Leave a Reply


The content on this web site is provided for your information only and does not purport to provide or imply legal advice.
Should opinions, explanations, or discussions conflict with current FARs, other rules, regulations, or laws, then appropriate provisions of those rules, regulations, or laws prevail.
Navigation charts are provided for illustrative purposes only and are Not for Navigation.
TouringMachine.com is not responsible or liable for any errors, omissions, or incorrect information contained within this site.
Use at your own risk.
Copyright © 2002-2022 Touring Machine Company. All Rights Reserved.